PA6 YH-3200 SINOPEC BALING
159
- Properties:high strengthhigh viscositywear resistantHigh viscosity
- Usages:Industrial applicationsFiber gradefilm
Compare
View PricesTechnical Data Sheet
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| purpose | 尼龙-6切片粘度在2.4-3.6之间.可满足高速纺和拉膜生产要求.广泛用于民用丝、工业丝、尼龙6薄膜以及高强度工程塑料的生产。 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | GB 1033-86 | 1.157 g/cm | |
| relative viscosity | GB/T 1632-93 | 3.20±0.03 --- |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | GB/T 1043-93 | 1.45 % | |
| bending strength | GB 9341-88 | 85.6 Mpa | |
| Flexural modulus | GB 9341-88 | 2028 Mpa | |
| Shore hardness | GB 9341-88 | 68.5 R | |
| Impact strength of cantilever beam gap | IEC (CTI) | 24.8 KJ/m | |
| tensile strength | GB 1040-92 | 65.4 Mpa | |
| elongation at break | GB 1040-92 | 191.5 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | --- | 8.0*10 Ω | |
| Dielectric loss | GB 1044-70 | 4.1*10 --- | |
| Surface Resistivity | GB 1044-70 | 6.7*10 Ω | |
| Volume resistivity | GB 1044-70 | 3.0*10 Ω | |
| dielectric constant | GB 1044-70 | 1.5 --- | |
| Volume resistivity | GB 1044-70 | 1.5*10 Ω.cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | --- | 75.0 °C | |
| melting temperature | --- | 218-224 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top