Phenolic X 22 Hexion Inc.

Properties:

Fillers organic fillers

Typical Applications:

Cookware shell handle

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Cookware \| shell \| handle
Properties:	Fillers \| organic fillers

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	23°C	ISO 179/1eA	1.5	kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	6.5	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	3.0mm	UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength		ISO 178	90.0	MPa
Compressive stress		ISO 604	250	MPa
Tensile modulus		ISO 527-2/1	7500	MPa
tensile strength		ISO 527-2/5	55.0	MPa
Bending modulus		ISO 178	7500	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	8.0MPa,Unannealed	ISO 75-2/C	115	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	--3	ISO 2577	0.60	%
Water absorption rate		ISO 62	70.0	mg
Shrinkage rate	--2	ISO 2577	0.55	%
Shrinkage rate	Shrinkage rate	--3	ISO 2577	0.40	%
density	23°C	ISO 1183	1.40	g/cm³
Apparent density		ISO 60	0.64	g/cm³
Shrinkage rate	--2	ISO 2577	0.90	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	1E+11	ohms·cm
Dielectric strength	1.00mm	IEC 60243-1	28	kV/mm
Relative permittivity	100Hz	IEC 60250	14.5
Dissipation factor	100Hz	IEC 60250	0.30
Compared to the anti leakage trace index	SolutionA	IEC 60112	PLC 4
Surface resistivity		IEC 60093	1E+10	ohms
hardness	Test Condition	Test Method	Test Result	Test Unit
Ball Pressure Test	H961/30	ISO 2039-1	275	MPa
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
Compression molding pressure			>15.0	MPa
Compression molding temperature			160to190	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top