PA12 6B+G-HS-UV Witcom Engineering Plastics B.V.

Properties:
Low warpage
good UV resistance
and thermal stability
Compare

Technical Data Sheet

physical property	Test Condition	Test Method	Test Result
density		ISO 1183	1.24 g/cm³
Shrinkage rate		ISO 294-4	0.50 to 0.80 %
Water absorption rate		ISO 62	1.0 %
Water absorption rate	Water absorption rate		ISO 62	0.50 %

Mechanical properties	Test Condition	Test Method	Test Result
tensile strength	Break	ISO 527-2	85.0 MPa
Tensile strain	Break	ISO 527-2	3.0 to 5.0 %
Flexural modulus		ISO 178	3500 MPa
bending strength		ISO 178	100 MPa
Impact strength of cantilever beam gap		ISO 180/1A	14 kJ/m²
Suspended wall beam without notch impact strength		ISO 180/1U	70 kJ/m²

Electrical performance	Test Condition	Test Method	Test Result
Surface Resistivity		ASTM D257	1E+02 ohm
Compared to the Leakage Tracking Index (CTI)		IEC 60112	PLC 1

Thermal performance	Test Method	Test Result
Heat distortion temperature	ISO 75-2/A	165 ℃
Linear coefficient of thermal expansion	ISO 11359-2	0.000049 cm/cm/℃
RTI Imp	UL 746	85.0 ℃
UL flame retardant rating	UL 94	HB
Burning wire flammability index	IEC 60695-2-12	750 ℃

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top