PC CARBO TEX K-30UV
17
CompareTechnical Data Sheet
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | ASTM D790 | 12400 Ibf/in | |
| Flexural modulus | ASTM D790 | 2160 Mpa | |
| ASTM D790 | 22000 Kgf/cm | ||
| ASTM D790 | 313000 Ibf/in | ||
| Impact strength of cantilever beam gap | ASTM D256 | 780 J/m | |
| ASTM D256 | 80 Kgf.cm/cm | ||
| ASTM D256 | 15 ft.ibf/in | ||
| tensile strength | ASTM D638 | 63 Mpa | |
| ASTM D638 | 640 Kgf/cm | ||
| ASTM D638 | 9100 Ibf/in | ||
| elongation | ASTM D638 | 120 % | |
| bending strength | ASTM D790 | 85 Mpa | |
| ASTM D790 | 870 Kgf/cm | ||
| tensile strength | ASTM D638/ISO 527 | 62 kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 87 kg/cm²(MPa)[Lb/in²] |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Volume resistivity | ASTM D257 | 10 Ω.cm |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792/ISO 1183 | 1.2 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238 | 15 g/10min | |
| Heat distortion temperature | ASTM D648 | 133 °C | |
| ASTM D648 | 271 ℉ | ||
| heat resistance | ASTM D257 | V-2 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top