Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ASTM D955 | 0.1-0.4 % |
| Shrinkage rate | | ASTM D955 | 0.8-1.1 % |
| Water absorption rate | | ASTM D570 | 0.03 % |
| Glass Fiber Content | | Ash | 30 % |
| other | Test Condition | Test Method | Test Result |
|---|
| characteristic | | | 强化阻燃级 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Flexural modulus | | ASTM D790 | ≥70000 kg/cm |
| Impact strength of cantilever beam gap | | ASTM D256 | 7-13 kg-cm/cm |
| tensile strength | | ASTM D638 | 1100-1400 kg/cm |
| Shore hardness | | ASTM D785 | 94 M-scale |
| bending strength | | ASTM D790 | 1500-2300 kg/cm |
| elongation at break | | ASTM D638 | 2.5-4.5 % |
| tensile strength | | ASTM D638/ISO 527 | 1100-1400 kg/cm²(MPa)[Lb/in²] |
| Rockwell hardness | | ASTM D785 | 94 |
| Flexural modulus | | ASTM D790/ISO 178 | 》70000 kg/cm²(MPa)[Lb/in²] |
| bending strength | | ASTM D790/ISO 178 | 1500-2300 kg/cm²(MPa)[Lb/in²] |
| elongation at break | | ASTM D638/ISO 527 | 2.5-4.5 % |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Induced positive connection | | ASTM D150 | 0.001 60Hz |
| arc resistance | | ASTM D495 | 100 sec |
| dielectric strength | | ASTM D149 | ＞20 KV/mm |
| Volume resistivity | | ASTM D257 | ＞10 Ω-cm |
| Volume resistivity | | ASTM D257 | ＞10 Ω |
| dielectric constant | | ASTM D150 | 3 60Hz |
| Surface Resistivity | | ASTM D257/IEC 60093 | 》10 Ω |
| arc resistance | | ASTM D495/IEC 60112 | 100 |
| Volume resistivity | | ASTM D257/IEC 60093 | 》10 Ω.cm |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 1.62-1.68 |
| Shrinkage rate | | ASTM D955 | 0.1-0.4/0.8-1.1 % |
| Water absorption rate | | ASTM D570/ISO 62 | 0.03 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| flame resistance | | UL 94 | V-0 |
| melting temperature | | DSC | 225 °C |
| Linear coefficient of thermal expansion | | ASTM D696 | 3 |
| Heat distortion temperature | | ASTM D648 | 208（220） °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices