PP 9D12420 FR5UV
0
- Properties:Fillerglass fiber reinforced material20%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183 | 1.17 g/cm³ | |
| melt mass-flow rate | ISO1133 | 10 g/10min | |
| density | ISO 1183 | 1.17 g/cm³ | |
| ISO 1133 | 10 g/10 min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO527-2/5 | 6000 MPa | |
| Tensile stress | ISO527-2/5 | 70.0 MPa | |
| Tensile modulus | ISO 527-2/5 | 6000 MPa | |
| Tensile stress | ISO 527-2/5 | 70.0 MPa | |
| Impact strength of cantilever beam gap | ISO 180/1A | 6.0 kJ/m² | |
| ISO 180/1A | 7.0 kJ/m² |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO180/1A | 6.0 kJ/m² | |
| ISO180/1A | 7.0 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | IEC 60093 | 1E+15 ohms | |
| Volume resistivity | IEC 60093 | 1E+15 ohms·cm | |
| Surface Resistivity | IEC60093 | 1E+15 ohms | |
| Volume resistivity | IEC60093 | 1E+15 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melting temperature | ISO 11357 | 168 °C | |
| ISO11357 | 168 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top