SMMA Styrilic Grade 3030 Deltech Polymers Corporation
0
- Properties:Mechanical properties
CompareTechnical Data Sheet
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| Flexural modulus | ASTM D790 | 3310 MPa | |
| bending strength | ASTM D790 | 101 MPa | |
| Impact strength of cantilever beam gap | ASTM D256 | 32 J/m | |
| Heat distortion temperature | ASTM D648 | 91.1 °C | |
| vicat | ASTM D1525 | 102 °C | |
| refractive index | ASTM D542 | 1.560 | |
| transmissivity | ASTM D1003 | 92.8 % | |
| Haze ratio | ASTM D1003 | <0.50 % | |
| density | ASTM D792 | 1.09 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 2.3 g/10min | |
| Shrinkage rate | ASTM D955 | 0.30to0.60 % | |
| Water absorption rate | ASTM D570 | 0.14 % | |
| Tensile modulus | ASTM D638 | 2900 MPa | |
| tensile strength | Yield | ASTM D638 | 64.8 MPa |
| elongation | Break | ASTM D638 | 3.0 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top