
PPS Lion Idemitsu Composites PPS C-230SC Lion Idemitsu Composites Co., Ltd.
Properties:
Filler glass mineral 65% filler by weight
Product Description
Certificates(0)
Datasheet
Product Description
| Properties: | Filler | glass mineral | 65% | filler by weight |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO 179 | 7.2 | kJ/m² | |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 1.0mm | UL 94 | V-0 | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile strain | Break | ISO 527-2 | 1.7 | % |
| Bending modulus | ISO 178 | 19000 | MPa | |
| bending strength | ISO 178 | 240 | MPa | |
| tensile strength | ISO 527-2 | 150 | MPa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | MD | ISO 11359-2 | 2.2E-05 | cm/cm/°C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ISO 1183 | 1.97 | g/cm³ | |
| Shrinkage rate | TD | ISO 294-4 | 0.60 | % |
| MD | ISO 294-4 | 0.30 | % | |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.020 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | 3.00mm | IEC 60243-1 | 14 | kV/mm |
| Dielectric constant | IEC 60250 | 4.00 | ||
| Volume resistivity | ASTM D257 | 1E+16 | ohms·cm | |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | R-Sale | ISO 2039-2 | 122 | |
| Supplementary Information | Test Condition | Test Method | Test Result | Test Unit |
| Flowability | 1.00mm,Flowability | Internal Method | 9.30 | cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.