
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| optical performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| turbidity | ASTM D1003 | 2.0 | % | |
| Refractive index | ASTM D542 | 1.570 | ||
| ISO 489 | 1.570 | |||
| transmissivity | 550nm | ASTM D1003 | 90.0 | % |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile modulus | ASTM D638 | 2240 | Mpa | |
| ISO 527-2 | 2240 | Mpa | ||
| tensile strength | Yield,23°C | ASTM D638 | 27.6 | Mpa |
| Yield,23°C | ISO 527-2 | 28.0 | Mpa | |
| elongation | Break | ASTM D638 | 40 | % |
| Bending modulus | ASTM D790 | 2280 | Mpa | |
| ISO 178 | 2280 | Mpa | ||
| bending strength | ASTM D790 | 55.2 | Mpa | |
| ISO 178 | 55.0 | Mpa | ||
| Rockwell hardness | M-Scale | ASTM D785 | 80 | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1.8MPa,Annealed | 92.2 | °C | |
| Vicat softening temperature | ASTM D15253 | 97.8 | °C | |
| Maximum operating temperature | 250 | °C | ||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | ISO 294-4 | 0.20-0.60 | % | |
| Water absorption rate | Saturation,23°C | ASTM D570 | 0.10 | % |
| Saturation,23°C | ISO 62 | 0.10 | % | |
| density | ASTM D792 | 1.04 | g/cm³ | |
| ISO 1183 | 1.04 | g/cm³ | ||
| melt mass-flow rate | 200°C/5.0kg | ASTM D1238 | 3.5 | g/10min |
| Melt Volume Flow Rate (MVR) | 200°C/5.0kg | ISO 1133 | 3.50 | cm3/10min |
| Shrinkage rate | MD | ASTM D955 | 0.20-0.60 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.