Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D1238 | 9.0 g/10min |
| spiral flow length | | 内部方法 | 70.0 cm |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | R-Scale | ASTM D785 | 90 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| DuPontImpactStrength | | ASTM D2794 | >2.94 J |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 120 J/m |
| Impact strength of cantilever beam gap | | ASTM D256 | 39 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Yield | ASTM D638 | 26.5 MPa |
| elongation | Break | ASTM D638 | >500 % |
| Flexural modulus | | ASTM D790 | 1180 MPa |
| aging | Test Condition | Test Method | Test Result |
|---|
| Accelerated oven aging in the air | | ASTM D3012 | 15.0 day |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| vicat | | ASTM D1525 | 150 °C |
| Heat distortion temperature | | ASTM D648 | 110 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare