Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ISO294-4 | 1.1 % |
| Shrinkage rate | | ISO294-4 | 1.1 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | V-0 |
| UL flame retardant rating | | UL94 | V-0 |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Burning wire flammability index | | IEC60695-2-12 | 960 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 775 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 775 °C |
| Hot filament ignition temperature | | IEC60695-2-13 | 775 °C |
| Limiting Oxygen Index | | ISO4589-2 | 32 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2/1 | 3500 Mpa |
| Tensile stress | | ISO527-2/50 | 80.0 Mpa |
| Tensile strain | | ISO527-2/50 | >5.0 % |
| Bending modulus 2 | | ISO178 | 3300 Mpa |
| Bending stress 2 | | ISO178 | 125 Mpa |
| Fracture bending strain 3 | | ISO178 | 6.2 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179/1eU | 80 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 85 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC60093 | 1E+13 ohms |
| Volume resistivity | | IEC60093 | 1E+13 ohms·cm |
| dielectric strength | | IEC60243-1 | 19 KV/mm |
| CTI | | IEC60112 | 600 V |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/B | 220 °C |
| | ISO75-2/A | 80.0 °C |
| Melting temperature 5 | | DINEN11357-1 | 260 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices