POM 5010 BK ASAHI JAPAN

Form：Granules | Grade：Injection grade

Properties:

High impact resistanceMedium viscosity

Typical Applications:

Electrical applicationsHousehold daily necessitiesShellcurrencyEngine partsEngineering accessories

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Electrical applications \| Household daily necessities \| Shell \| currency \| Engine parts \| Engineering accessories
Properties:	High impact resistance \| Medium viscosity

Certificates

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5mm	UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Taber abraser		ASTM D1044	13.0	mg
bending strength		ASTM D790	107	Mpa
Bending modulus	--	ISO 178	3100	Mpa
Bending modulus	Bending modulus	--	ASTM D790	3040	Mpa
elongation	Break	ASTMD638	30	%
tensile strength	--	ASTM D638	72.0	Mpa
tensile strength	tensile strength	Yield	ISO 527-2	72.0	Mpa
Tensile modulus		ISO 527-2	3300	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	MD	ASTMD696	1E-04	cm/cm/°C
specific heat			1470	J/kg/°C
thermal conductivity			0.23	W/m/K
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	105	°C
	Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	136	°C
		Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	165	°C
		Hot deformation temperature	Hot deformation temperature	0.45MPa,Unannealed	ASTM D648	172	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C,24hr,50%RH	ASTM D570	0.20	%
Shrinkage rate	MD	Internal Method	1.8-2.2	%
melt mass-flow rate	190°C/2.16kg	ISO 1133	22	g/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Arc resistance		ASTM D495	250	sec
Dissipation factor	23°C,1MHz	ASTM D150	7E-03
Dielectric constant	23°C,1MHz	ASTM D150	3.80
Dielectric strength		ASTM D149	18	KV/mm
Volume resistivity	23°C	ASTM D257	1.0E+15-1.0E+16	ohms·cm
Surface resistivity		ASTM D257	1.0E+16-1.0E+17	ohms
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ASTM D785	120
Rockwell hardness	Rockwell hardness	M-Scale	ASTM D785	94

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top