PA6 Alloy LAMIGAMID® 400 SCHWARTZ GERMANY
0
- Usages:Gearswheelshousing
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO 1183 | 1.13 g/cm³ | |
| Water absorption rate | ISO 62 | 2.3 % |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ball-indentation hardness | ISO 2039-1 | <100 MPa |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ISO 527-2 | 45.0to60.0 MPa |
| Break | ISO 527-2 | <50.0 MPa | |
| Flexural modulus | ISO 178 | <2000 MPa | |
| Tensile strain | Break | ISO 527-2 | >45 % |
| Tensile modulus | ISO 527-2 | >1300 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ISO 180 | >10 kJ/m² | |
| Suspended wall beam without notch impact strength | ISO 180 | 无断裂 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Linear coefficient of thermal expansion | ISO 11359-2 | 1.0E-4到1.5E-4 cm/cm/°C | |
| Heat distortion temperature | ISO 75-2/B | 180to195 °C | |
| melting temperature | 210to218 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top