
PPA HFFR 4133NT SOLVAY USA
139
Form:Granules
Properties:
Low warpageGlass fiber reinforcedFiller: Glass fiber reinfFiller by weightFiller by weight
Typical Applications:
Automotive ApplicationsLaptop caseElectrical/Electronic Applications
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Automotive Applications | Laptop case | Electrical/Electronic Applications |
| Properties: | Low warpage | Glass fiber reinforced | Filler: Glass fiber reinf | Filler by weight | Filler by weight |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Suspended wall beam without notch impact strength | ISO 180/1U | 40to48 | kJ/m² | |
| Impact strength of cantilever beam gap | ISO 180/1A | 7.0to8.0 | kJ/m² | |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 0.40mm | UL 94 | V-0 | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | ISO 178 | 220to230 | Mpa | |
| Bending modulus | ISO 178 | 10800 | Mpa | |
| Tensile strain | Break | ISO 527-2 | 1.9to2.3 | % |
| tensile strength | Yield | ISO 527-2 | 145to160 | Mpa |
| Tensile modulus | ISO 527-2 | 12000 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | TD:120to200°C | ASTME831 | 1.3E-04 | cm/cm/°C |
| TD:0to90°C | ASTME831 | 8E-05 | cm/cm/°C | |
| MD:120to200°C | ASTME831 | 1.2E-05 | cm/cm/°C | |
| MD:0to90°C | ASTME831 | 2E-05 | cm/cm/°C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/Af | 300 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | 24hr | ASTM D570 | 0.28 | % |
| Shrinkage rate | MD | ISO 294-4 | 0.32 | % |
| TD | ISO 294-4 | 1.3 | % | |
| density | ISO 1183/A | 1.46 | g/cm³ | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | 0.800mm | ASTM D149 | 30 | KV/mm |
| Volume resistivity | ASTM D257 | 1.3E+16 | ohms·cm | |
| Compared to the anti leakage trace index | CTI | UL 746 | PLC 0 | |
| Dissipation factor | 1MHz | ASTM D150 | 0.012 | |
| 100Hz | ASTM D150 | 5E-03 | ||
| Dielectric constant | 1MHz | ASTM D150 | 3.53 | |
| 100Hz | ASTM D150 | 3.78 | ||
| Dielectric strength | 1.60mm | ASTM D149 | 26 | KV/mm |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | R-Scale | ASTM D785 | 121 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.