Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO1183 | 1.22到1.26 g/cm³ |
| melt mass-flow rate | | ISO1133 | 13到18 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ISO2039-1 | 86.0 MPa |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Hot filament ignition temperature | | | 750 °C |
| Hot filament ignition temperature | | | 750 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | | ISO527-2 | >27.0 MPa |
| Tensile strain | Break | ISO527-2 | >5.0 % |
| Flexural modulus | | ISO178 | >3200 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO179 | >3.0 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179 | >10 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/B | 132 °C |
| | ISO75-2/A | 83.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare