Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ISO 62 | 20 % |
| Water absorption rate | | ISO 62 | 2.5 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Supporting hardness | | ISO 7619-1 | 30 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO 527-2 | -- Mpa |
| Tensile stress | | ISO 527-2 | 16.0 Mpa |
| Tensile stress | | ISO 527-2 | -- Mpa |
| Tensile strain | | ISO 527-2 | > 300 % |
| squeeze out | Test Condition | Test Method | Test Result |
|---|
| drying temperature | | | 65 到 75 °C |
| drying time | | | 4.0 到 6.0 hr |
| Melt Temperature | | | 210 到 230 °C |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC 60093 | -- ohms |
| Volume resistivity | | IEC 60093 | 1.0E+10 ohms·cm |
| Volume resistivity | | CSA LISTED | 41 % |
| injection | Test Condition | Test Method | Test Result |
|---|
| drying temperature | | | 65 到 75 °C |
| drying time | | | 4.0 到 6.0 hr |
| Processing (melt) temperature | | | 200 到 270 °C |
| Temperature | | | 25 到 60 °C |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Melting temperature 2 | | ISO 11357-3 | 150 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices