PETG WS-501N JIANGYIN HUAHONG

245

Form：Granules

Properties:

High toughnessHigh gloss

Typical Applications:

Electrical applications

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Electrical applications
Properties:	High toughness \| High gloss

Certificates

FDA

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
turbidity		/	< 1.0	%
Transmittance rate		ASDM D541	90	%
Refractive index		ASDM D542	1.56
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness		R-Scale	117	°C
Izod Notched Impact Strength	23°C	ASTM D256	102	J/m
Dart impact	Normal temperature	ASTM D358	1803	g
Dart impact	Dart impact	Low temperature	ASTM D358	829	g
Bending modulus	1.27mm/min(3 inch/min)	ASTM D790	21200	Kgf/cm2
bending strength	1.27mm/min(2 inch/min)	ASTM D790	680	Kgf/cm2
elongation	@Break 50mm/min(2 inch/min)	ASTM D638	165	%
elongation	elongation	@Yield 50mm/min(2 inch/min)	ASTM D638	5	%
tensile strength	@Break 50mm/min(2 inch/min)	ASTM D638	292	Kgf/cm2
tensile strength	tensile strength	@Yield 50mm/min(2 inch/min)	ASTM D638	508	Kgf/cm2
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		/	≥196±2	°C
melt mass-flow rate		ASTM D 1238-04	1.8	g/10min
Hot deformation temperature	0.45MPa	ASTM D648	77	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate		ASTM D570	0.12	%
proportion		ASTM D792	1.29	kg/cm3
viscosity		Ubbelodhe viscometer	0.780±0.015	dl/g
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric loss	1 MHz	ASTM D150	0.023	–
Dielectric loss	Dielectric loss	1 kHz	ASTM D150	0.005	–
Dielectric constant	1 MHz	ASTM D150	2.4	–
Dielectric constant	Dielectric constant	1 kHz	ASTM D150	2.6	–
Dielectric strength	(short time,500V/sec)	ASTM D149	16	kV·mm
Volume resistivity		ASTM D257	10^15	ohm·cm
Surface resistivity		ASTM D257	10^16	Ohm
flame retardant performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.50mm	UL 94	HB
	UL flame retardant rating	3.00mm	UL 94	V-2
	UL flame retardant rating	UL flame retardant rating	1.00mm	UL 94	HB

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top