
PC 201-15 STYRON US
162
Form:Granules | Grade:Transparent level
Properties:
heat-resistingtransparentHigh impact resistance
Typical Applications:
heat-resistingtransparentHigh impact resistanceUsage: ToyFood containersPackaging productsSports equipment and baby bottles etc.
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | heat-resisting | transparent | High impact resistance | Usage: Toy | Food containers | Packaging products | Sports equipment and baby bottles | etc. |
| Properties: | heat-resisting | transparent | High impact resistance |
Certificates
No Data...
Technical Data Sheet
| Other performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Water absorption rate | 24hr,23℃ | ASTM D-570 | 0.15 | % |
| Limiting Oxygen Index (LOI) | ASTM D-2863 | 26 | % | |
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | ASTM D-1238 | 15 | g/10min | |
| density | ASTM D-792 | 1200 | kg/m | |
| Water absorption rate | 23℃,相对湿度50% | ASTM D-570 | 0.32 | % |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| elongation | Yield点 | ASTM D-638 | 60 | % |
| tensile strength | Break点 | ASTM D-638 | 71 | Mpa |
| Yield点 | ASTM D-638 | 60 | Mpa | |
| Tensile modulus | ASTM D-638 | 2340 | Mpa | |
| Dart impact | 总能量@23℃ | ASTM D-3763 | 87 | J |
| Bending modulus | ASTM D-790 | 2410 | Mpa | |
| Rockwell hardness | ASTM D-785 | 72 | M标度 | |
| bending strength | ASTM D-790 | 96 | Mpa | |
| Impact strength of cantilever beam gap | ASTM D-256 | 850 | J/m | |
| 23℃ | ASTM D-256 | 未破裂 | ||
| elongation | Break点 | ASTM D-638 | 150 | % |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Average degree of combustion | ASTM D-635 | 25 | mm | |
| Ball indentation temperature | IEC 598-1 | >125 | °C | |
| Vicat softening temperature | 50 C/hour | ASTM D-1525 | 148 | °C |
| Hot deformation temperature | Annealed@1.82MPa(4 mm) | ASTM D-648 | 140 | °C |
| Shrinkage rate | 40℃-82℃ | ASTM D-696 | 68×10 | mm/mm/℃ |
| Hot deformation temperature | Annealed@0.45MPa(4 mm) | ASTM D-648 | 143 | °C |
| Unannealed@1.82MPa(4 mm) | ASTM D-648 | 127 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | ASTM D-955 | 0.005-0.007 | mm/mm | |
| turbidity | ASTM D-1003 | 0.7-1.5 | % | |
| Refractive index | ASTM D-542 | 1.586 | ||
| Transmittance rate | ASTM D-1003 | 89 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | 60Hz | ASTM D-149 | 17 | KV/mm |
| Dissipation factor | 60Hz | ASTM D-150 | 0.001 | |
| Glow wire combustion index (GWFI) | 2mm | IEC 695-2-1 | 850 | °C |
| Compared to the Leakage Traceability Index (CTI) | 2mm | IEC 112 | 250 | V |
| Volume resistivity | 23℃ ,干 | ASTM D-257 | 2.0×10 | Ω.cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.