PLA REVODE110
38
- Properties:Polylactic acid resinEasy to match colorsEasy to print
- Usages:GonorrheaBiaxial stretching film
Compare
View PricesTechnical Data Sheet
| Physical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Density | 内部方法 | 1.20 到 1.30 g/cm³ | |
| Melt mass flow rate | 内部方法 | 2.0 到 10 g/10min |
| Mechanical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | 内部方法 | > 50.0 Mpa | |
| Tensile strain | 内部方法 | > 3.0 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | 内部方法 | 3.0 到 5.0 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| glass transition temperature | 内部方法 | 59.0 到 62.0 °C | |
| 内部方法 | 155 到 160 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top