SEBS G G401.A55.B
0
- Properties:BlockCopolymeradhesivescratch resistancegood chemical resistancegood wear and corrosion resistanceand softness
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 0.890 g/cm³ | |
| Shrinkage rate | ASTM D955 | 2.8 % | |
| ASTM D955 | 1.4 % | ||
| density | ASTM D792 | 0.890 g/cm³ | |
| Shrinkage rate | ASTM D955 | 2.8 % | |
| 1.4 |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | Shore A | ASTM D2240 | 55 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ozone resistance | ASTM D518 | NoCracks | |
| ASTM D518 | No Cracks |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tear strength | ASTM D624 | 37.0 kN/m | |
| wear resistance | ASTM D1630 | 85 mm³ | |
| Shore hardness | ASTM D2240 | 55 | |
| wear resistance | ASTM D1630 | 85 mm³ | |
| tensile strength | ASTM D412 | 1.60 MPa | |
| 2.80 | |||
| Break | ASTM D412 | 6.50 MPa | |
| elongation | Break | ASTM D412 | 750 % |
| compression set | ASTM D395 | 22 % | |
| 38 | |||
| 64 |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D412 | 1.60 MPa | |
| ASTM D412 | 2.80 MPa | ||
| Break | ASTM D412 | 6.50 MPa | |
| elongation | Break | ASTM D412 | 750 % |
| tear strength | ASTM D624 | 37.0 kN/m | |
| compression set | ASTM D395 | 22 % | |
| ASTM D395 | 38 % | ||
| ASTM D395 | 64 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top