
PTFE Modified PTFE TFM 1705 3M USA
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Tensile modulus | ISO 527-2 | 650 | MPa | |
| Hot deformation temperature | 15MPa2 | ASTM D621 | 9.00 | % |
| 15MPa3 | ASTM D621 | 10.0 | % | |
| 15MPa4 | ASTM D621 | 5.00 | % | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | MD:30to100°C | DIN 53752 | 1.2E-04 | cm/cm/°C |
| MD:30to200°C | DIN 53752 | 1.4E-04 | cm/cm/°C | |
| MD:30to260°C | DIN 53752 | 1.7E-04 | cm/cm/°C | |
| thermal conductivity | DIN 52612 | 0.22 | W/m/K | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | ISO 12086 | 2.16 | g/cm³ | |
| Apparent density | ISO 60 | 0.41 | g/cm³ | |
| Shrinkage rate | Internal Method | 5.4 | % | |
| Average particle size | ISO 13320 | 25 | µm | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Surface resistivity | IEC 60093 | 1E+17 | ohms | |
| Volume resistivity | IEC 60093 | 1E+18 | ohms·cm | |
| Dielectric strength | 0.100mm | ISO 12086 | 90 | kV/mm |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Shore hardness | ShoreD | ISO 868 | 59 | |
| film | Test Condition | Test Method | Test Result | Test Unit |
| elongation | Break,100μm | ISO 527-3 | 560 | % |
| tensile strength | 100μm | ISO 527-3 | 47.0 | MPa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.