
ABS D-1200 ZHENJIANG CHIMEI
844
Form:Granules | Grade:Heat resistant grade
Properties:
Flame retardant
Typical Applications:
Electrical fieldElectronic field
Product Description
Certificates(3)
Datasheet
Product Description
| Typical Applications: | Electrical field | Electronic field |
| Properties: | Flame retardant |
Certificates


Technical Data Sheet
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| melt mass-flow rate | 200℃,5kg | ASTM D-1238 | 3 | g/10min |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Impact strength of cantilever beam gap | 1/4"bar 23℃(73℉) | ASTM D-256 Method A | 20(196)(3.67) | Kgf-cm/cm(J/M)(ft-1bs/in.) |
| 1/8"bar 23℃(73℉) | ASTM D-256 Method A | 23(225)(4.22) | Kgf-cm/cm(J/M)(ft-1bs/in.) | |
| tensile strength | 1/8"Thickness 50mm/min 23℃(73℉) | ASTM D-638 | 460(45.1)(6.54) | Kgf/cm |
| bending strength | 1/8"×1"×4"bar 15mm/min 23℃(73℉) | ASTM D-790 | 750(73.5)(10.7) | Kgf/cm |
| Bending modulus | 1/8"×1"×4"bar 15mm/min 23℃(73℉) | ASTM D-790 | 26700(2.62)(3.79) | Kgf/cm |
| Rockwell hardness | 23℃(73℉) | ASTM D-785 | 103 | R scale |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 1/2"×1/2"×5"bar 18.6kgf/cm | ASTM D-648 | 80(176) | ℃(℉) |
| Hot softening point temperature | Load 1Kg | ASTM D-1525 | 97(206) | ℃(℉) |
| UL flame retardant rating | 1/8"Thickness | UL 94 | V-0 | |
| 1162.54mm | UL 94 | V-0 | ||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| density | 23℃(73℉) | ASTM D-792 | 1.17 | |
| Shrinkage rate | ASTM D-955 | 0.3-0.5 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.