POM TF-30 CF2003 DAICEL MALAYSIA

Form：Granules

Properties:

wear resistantHigh temperature resistan

Typical Applications:

Fitness equipmentAutomotive Applications

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Fitness equipment \| Automotive Applications
Properties:	wear resistant \| High temperature resistan

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	1300	Mpa
Wear factor	0.060MPa,0.15m/sec7	JISK7218	1500	10^-8mm³/N·m
	Wear factor	0.060MPa,0.15m/sec6	JISK7218	300	10^-8mm³/N·m
		Wear factor	0.49MPa,0.30m/sec5	JISK7218	200	10^-8mm³/N·m
		Wear factor	Wear factor	0.49MPa,0.30m/sec4	JISK7218	<1.0	10^-8mm³/N·m
Friction coefficient	Steel - Dynamic3	JISK7218	0.80
Friction coefficient	Friction coefficient	Dynamic2	JISK7218	0.58
bending strength		ISO 178	43.0	Mpa
Bending modulus		ISO 178	1200	Mpa
Nominal tensile fracture strain		ISO 527-2	75	%
tensile strength		ISO 527-2	37.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	TD：23to55°C	Internal Method	1.4E-04	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD：23to55°C	Internal Method	1.4E-04	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C,24hr	ISO 62	0.80	%
Melt Volume Flow Rate (MVR)	190°C/2.16kg	ISO 1133	7.00	cm3/10min
melt mass-flow rate	190°C/2.16kg	ISO 1133	8.0	g/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	3E+13	ohms·cm
Surface resistivity		IEC 60093	5E+13	ohms
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	M-Scale	ISO 2039-2	45
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
ColourNumber			CF2002/CF2003

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top