Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ISO 1183 | 1.50 g/cm³ |
| Shrinkage rate 2 | | 内部方法 | 0.50 到 0.80 % |
| Shrinkage rate 2 | | 内部方法 | 0.20 到 0.40 % |
| Water absorption rate | | ISO 62 | 0.40 % |
| Water absorption rate | | ISO 62 | 4.8 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ISO 2039-2 | 103 |
| Rockwell hardness | | ISO 2039-2 | 121 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | | ISO 527-2 | 280 Mpa |
| Tensile stress | | ISO 527-2 | 220 Mpa |
| Tensile stress | | ISO 527-2 | 140 Mpa |
| Tensile strain | | ISO 527-2 | 2.5 % |
| Tensile strain | | ISO 527-2 | 3.0 % |
| Tensile strain | | ISO 527-2 | 5.5 % |
| Flexural modulus | | ISO 178 | 15500 Mpa |
| Flexural modulus | | ISO 178 | 13800 Mpa |
| Flexural modulus | | ISO 178 | 8600 Mpa |
| Bending stress | | ISO 178 | 380 Mpa |
| Bending stress | | ISO 178 | 345 Mpa |
| Bending stress | | ISO 178 | 230 Mpa |
| compression stress | | ISO 604 | 265 Mpa |
| compression stress | | ISO 604 | 195 Mpa |
| compression stress | | ISO 604 | 120 Mpa |
| shear strength | | ASTM D732 | 105 Mpa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO 179 | 12 kJ/m² |
| Charpy Notched Impact Strength | | ISO 179 | 15 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179 | 85 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO 179 | 90 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | IEC 60093 | 1.0E+13 ohms·cm |
| dielectric strength | | IEC 60243-1 | 19 KV/mm |
| dielectric constant | | IEC 60250 | 4.70 |
| dielectric constant | | IEC 60250 | 4.50 |
| dielectric constant | | IEC 60250 | 4.10 |
| Dissipation Factor | | IEC 60250 | 0.020 |
| Dissipation Factor | | IEC 60250 | 0.020 |
| Dissipation Factor | | IEC 60250 | 0.020 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO 75-2/B | 263 °C |
| melting temperature | | DSC | 265 °C |
| | ISO 11359-2 | 2.0E-5 到 3.0E-5 cm/cm/°C |
| specific heat | | | 1500 J/kg/°C |
| thermal conductivity | | | 0.42 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices