PC J-50/40/NAT
0
- Properties:Granular material
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.52 g/cm3 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D638 | 10300 MPa |
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| Shrinkage rate | ASTM D955 | 0.15 % | |
| Flexural modulus | ASTM D790 | 9650 MPa | |
| bending strength | ASTM D790 | 207 MPa | |
| Impact strength of cantilever beam gap | ASTM D256 | 72.1 J/m | |
| Water absorption rate | ASTM D570 | 0.15 % | |
| tensile strength | ASTM D638 | 148 MPa | |
| elongation | Break | ASTM D638 | 3.5 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 138 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top