PA6 Generic Nylon 6 - Glass BeadGlass Fiber

0
  • Properties:
    Filler
    glass beads
    fiberglass

Technical Data Sheet

physical property Test ConditionTest MethodTest Result
Shrinkage rateASTM D9550.39to0.61 %
Shrinkage rateISO 294-40.28to1.3 %
Water absorption rateISO 626.5to7.1 %
Water absorption rateISO 622.0to2.3 %
densityASTM D7921.34to1.36 g/cm³
densityISO 11831.34to1.37 g/cm³
hardnessTest ConditionTest MethodTest Result
ball-indentation hardnessISO 2039-1185 MPa
flammabilityTest ConditionTest MethodTest Result
Burning wire flammability indexIEC 60695-2-12650to960 °C
Limiting Oxygen IndexISO 4589-223to24 %
Impact resistanceTest ConditionTest MethodTest Result
Charpy Notched Impact StrengthISO 1793.0to12 kJ/m²
Impact strength of simply supported beam without notchISO 17934to46 kJ/m²
Impact strength of cantilever beam gapASTM D25637to61 J/m
Impact strength of cantilever beam gapISO 1804.0to10 kJ/m²
Suspended wall beam without notch impact strengthISO 18030to36 kJ/m²
Multi axis Instrumented Impact EnergyISO 6603-22.00to3.63 J
Multi axis Instrumented Peak Impact ForceISO 6603-2700to813 N
Mechanical propertiesTest ConditionTest MethodTest Result
bending strengthASTM D790130to200 MPa
bending strengthISO 178144to186 MPa
Tensile modulusASTM D6386110to6210 MPa
Tensile modulusISO 527-24700to8890 MPa
tensile strength ASTM D638116to125 MPa
tensile strength ISO 527-292.6to125 MPa
elongationASTM D6382.0to4.0 %
elongationISO 527-22.4to5.0 %
Flexural modulusASTM D7904770to5810 MPa
Flexural modulusISO 1784690to5870 MPa
Electrical performanceTest ConditionTest MethodTest Result
Compared to the Leakage Tracking Index (CTI)IEC 60112PLC 1
Surface ResistivityIEC 600931.0E+10到2.5E+14 ohms
Volume resistivityIEC 600931.0E+13到2.5E+15 ohms·cm
dielectric strengthIEC 60243-111to37 kV/mm
relative permittivityIEC 602504.25
Dissipation FactorIEC 602500.013to0.027
Thermal performanceTest ConditionTest MethodTest Result
Heat distortion temperatureASTMD648200to216 °C
vicatISO 306199to211 °C
melting temperatureISO 11357-3222 °C
melting temperatureISO 3146220 °C
Linear coefficient of thermal expansionISO 11359-23.0E-5到3.8E-5 cm/cm/°C
Linear coefficient of thermal expansionISO 11359-29E-05 cm/cm/°C
Heat distortion temperatureASTM D648180to204 °C
Heat distortion temperatureISO 75-2/A189to192 °C
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Contact Us

Get App

Top