PC 505RU-131 SABIC INNOVATIVE NANSHA

Form：Granules | Grade：Wear resistant grade

Properties:

Bromine free flame retardHigh transparency

Typical Applications:

Home appliance productsAutomotive components

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Home appliance products \| Automotive components
Properties:	Bromine free flame retard \| High transparency

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	-30°C	ISO 179/1eA	7.0	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179/1eA	10	kJ/m²
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	NoBreak
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	NoBreak
Impact strength of cantilever beam gap	-30°C	ISO 180/1A	8.0	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ISO 180/1A	10	kJ/m²
Suspended wall beam without notch impact strength	-30°C	ISO 180/1U	73	kJ/m²
Suspended wall beam without notch impact strength	Suspended wall beam without notch impact strength	23°C	ISO 180/1U	NoBreak
Dart impact	23°C,TotalEnergy	ASTM D3763	25.0	J
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.75mm	UL 94	V-2
	UL flame retardant rating	1.5mm	UL 94	V-0
	UL flame retardant rating	UL flame retardant rating	3.0mm	UL 94	5VB5VA
Burning wire flammability index	0.75mm	IEC 60695-2-12	960	°C
Hot filament ignition temperature	1.0mm	IEC 60695-2-13	850	°C
Hot filament ignition temperature	Hot filament ignition temperature	3.0mm	IEC 60695-2-13	875	°C
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
elongation	Yield	ASTM D638	4.0	%
Tensile strain	Yield	ISO 527-2/5	3.0	%
elongation	Break	ASTM D638	6.0	%
Tensile strain	Break	ISO 527-2/5	6.0	%
Bending modulus	50.0mmSpan	ASTM D790	3200	Mpa
Bending modulus	Bending modulus		ISO 178	3500	Mpa
bending strength		ISO 178	122	Mpa
bending strength	bending strength	Yield,50.0mmSpan	ASTM D790	114	Mpa
Tensile modulus		ASTM D638	3600	Mpa
Tensile modulus	Tensile modulus		ISO 527-2/1	3500	Mpa
tensile strength	Yield	ASTM D638	74.0	Mpa
	tensile strength	Yield	ISO 527-2/5	72.0	Mpa
		tensile strength	Break	ASTM D638	62.0	Mpa
		tensile strength	tensile strength	Break	ISO 527-2/5	60.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed,3.20mm	ASTM D648	137	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed,64.0mmSpan	ISO 75-2/Af	136	°C
Vicat softening temperature		ASTM D152510	149	°C
	Vicat softening temperature	--	ISO 306/B50	147	°C
	Vicat softening temperature	Vicat softening temperature	--	ISO 306/B120	149	°C
Ball Pressure Test	125°C	IEC 60695-10-2	Pass
Linear coefficient of thermal expansion	MD：-40to40°C	ASTME831	5E-05	cm/cm/°C
	Linear coefficient of thermal expansion	MD：-40to40°C	ISO 11359-2	5E-05	cm/cm/°C
		Linear coefficient of thermal expansion	TD：-40to40°C	ASTME831	7.4E-05	cm/cm/°C
		Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD：-40to40°C	ISO 11359-2	8.5E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	300°C/1.2kg	ASTM D1238	8.0	g/10min
Melt Volume Flow Rate (MVR)	300°C/1.2kg	ISO 1133	7.00	cm3/10min
Shrinkage rate	MD：3.20mm	Internal Method	0.40-0.60	%
Water absorption rate	Saturation,23°C	ISO 62	0.30	%
Water absorption rate	Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.15	%
Outdoor applicability		UL 746C	f1
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the anti leakage trace index	CTI	UL 746	PLC 3
Compared to the anti leakage trace index	Compared to the anti leakage trace index		IEC 60112	PLC 3
High arc combustion index	HAI	UL 746	PLC 0
Hot wire ignition	HWI	UL 746	PLC 3

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top