PA66 GN1001BF NP LG CHEM KOREA

Form：Granules | Grade：Halogen-free flame retardant grade

Properties:

Flame retardantHalogen-free

Typical Applications:

Laptop case

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Laptop case
Properties:	Flame retardant \| Halogen-free

Certificates

MSDS

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.40082mm	UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength	23°C, 6.40 mm, Injection	ASTM D790	113	Mpa
Bending modulus	23°C, 6.40 mm, Injection	ASTM D790	3330	Mpa
elongation	Break, 23°C, 3.20 mm, Injection	ASTM D638	28	%
tensile strength	Yield, 23°C, 3.20 mm, Injection	ASTM D638	78.5	Mpa
injection	Test Condition	Test Method	Test Result	Test Unit
Back pressure			0.490 to 1.96	Mpa
Screw speed			60 to 200	rpm
Mold temperature			60 to 90	°C
Processing (melt) temperature			260 to 280	°C
Spray nozzle temperature			270 to 280	°C
Temperature at the front of the material cylinder			260 to 275	°C
Temperature in the middle of the barrel			260 to 275	°C
Temperature at the rear of the barrel			255 to 270	°C
Suggested maximum moisture content			0.10	%
drying time			4.0 to 5.0	hr
drying temperature			80 to 100	°C
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	Flow	ASTM D696	7.0E-5	cm/cm/°C
Melting temperature		ASTM D3418	260	°C
Hot deformation temperature	1.8 MPa, Unannealed, 6.40 mm, Injection	ASTM D648	85.0	°C
Hot deformation temperature	Hot deformation temperature	0.45 MPa, Unannealed, 6.40 mm, Injection	ASTM D648	230	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	24 hr, 23°C	ASTM D570	1.3	%
Shrinkage rate	23°C, 3.20 mm, Injection，Flow	ASTM D955	0.90 - 1.6	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	23°C, 1 MHz	ASTM D150	3.00
Dielectric strength	23°C, 1.00 mm	ASTM D149	22	KV/mm
Volume resistivity	23°C	ASTM D257	1.0E+14	ohms·cm
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale, 23°C, Injection	ASTM D785	120

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top