PP Homopolymer Talcoprene® 340TL NERO SO.F.TER ITALY

Properties:

Filler mineral filler 40% filler by weight

Product Description

Certificates(0)

Datasheet

Product Description

Properties:

Filler | mineral filler | 40% | filler by weight

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23°C	ASTM D256	32	J/m
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	3.2mm	UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Break	ASTM D638	30.0	MPa
Bending modulus		ASTM D790	3800	MPa
bending strength		ASTM D790	49.0	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	73.0	°C
Vicat softening temperature		ASTM D15252	95.0	°C
Linear coefficient of thermal expansion	MD	ASTM D696	8E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C,24hr	ASTM D570	0.050	%
ash content		Internal Method	40	%
density		ASTM D792	1.24	g/cm³
melt mass-flow rate	230°C/2.16kg	ASTM D1238	4.5	g/10min
Shrinkage rate		Internal Method	1.0	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D257	1E+13	ohms
Dielectric constant	1kHz	ASTM D150	2.50
Compared to the anti leakage trace index		IEC 60112	PLC 0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top