
PBT ESTOPLAST EP 4000BB11 Ester Industries Ltd.
Typical Applications:
Applications in the automotive field connectors casings electrical and electronic applications automotive internal components
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Applications in the automotive field | connectors | casings | electrical and electronic applications | automotive internal components |
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | 23°C | ASTM D256A | 38 | J/m |
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 1.5mm | UL 94 | V-0 | |
| Burning wire flammability index | 3.0mm | IEC 60695-2-12 | 960 | °C |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| elongation | Break | ASTM D638 | 5.0 | % |
| bending strength | ASTM D790 | 105 | MPa | |
| tensile strength | Yield | ASTM D638 | 62.0 | MPa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 0.45MPa,Unannealed | ASTM D648 | 160 | °C |
| 1.8MPa,Unannealed | ASTM D648 | 65.0 | °C | |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | Saturation,23°C | ISO 62 | 0.30 | % |
| Equilibrium,23°C,50%RH | ISO 62 | 0.15 | % | |
| density | ASTM D792 | 1.43 | g/cm³ | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | IEC 60093 | 1E+13 | ohms·cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.