PC 8701 BK STYRON TAIWAN

Form：Granules | Grade：Injection grade

Properties:

Flame retardantGlass fiber reinforcedenhance

Typical Applications:

InstrumentationVideo devicescomponent

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Instrumentation \| Video devices \| component
Properties:	Flame retardant \| Glass fiber reinforced \| enhance

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap	23°C,InjectionMolded	ISO 180/A	9.0	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5mm	UL 94	V-0
Hot filament ignition temperature	1.0mm	IEC 60695-2-13	960	°C
	Hot filament ignition temperature	2.0mm	IEC 60695-2-13	960	°C
	Hot filament ignition temperature	Hot filament ignition temperature	3.0mm	IEC 60695-2-13	960	°C
Extreme Oxygen Index		ISO 4589-2	29	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus	4.00mm,InjectionMolded	ISO 527-2/1	3950	Mpa
Tensile modulus	Tensile modulus	4.00mm,InjectionMolded	ISO 527-2/50	4000	Mpa
tensile strength	Yield,4.00mm,InjectionMolded	ISO 527-2/50	65.0	Mpa
tensile strength	tensile strength	Break,4.00mm,Injection	ISO 527-2/50	50.0	Mpa
Tensile strain	Yield,4.00mm,InjectionMolded	ISO 527-2/50	4.0	%
Tensile strain	Tensile strain	Break,4.00mm,Injection	ISO 527-2/50	9.0	%
Bending modulus	4.00mm,InjectionMolded	ISO 178	3800	Mpa
bending strength	4.00mm,InjectionMolded	ISO 178	105	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	141	°C
	Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	133	°C
	Hot deformation temperature	Hot deformation temperature	1.8MPa,Annealed	ISO 75-2/A	139	°C
Vicat softening temperature	--	ISO 306/A120	155	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/B50	145	°C
Ball pressure temperature		IEC 60335-1	>130	°C
Linear coefficient of thermal expansion	MD：-40to80°C	ASTM D696	1.5E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	MD	ISO 294-4	0.40-0.60	%
melt mass-flow rate	300°C/1.2kg	ISO 1133	15	g/10min
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	1E+14	ohms
Volume resistivity	2.00mm	IEC 60093	1E+16	ohms·cm
Dielectric strength	2.00mm	IEC 60243-1	>70	KV/mm
Dielectric constant	2.00mm,50Hz	IEC 60250	3.00
Dielectric constant	Dielectric constant	2.00mm,1MHz	IEC 60250	3.10
Dissipation factor	2.00mm,50Hz	IEC 60250	8E-03
Dissipation factor	Dissipation factor	2.00mm,1MHz	IEC 60250	0.016

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top