PEEK 1260
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 1.41 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | M-Scale | ASTM D785 | 108 |
| Shore hardness | ASTM D2240 | 92 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| coefficient of friction | Itself - Dynamic | ASTM D1894 | 0.18 |
| Heat distortion temperature | ASTM D621 | 0.0600 % | |
| Wear factor | ASTM D3702 | 460 10^-8mm³/N·m | |
| Tensile modulus | ASTM D638 | 21700 MPa | |
| tensile strength | Break | ASTM D638 | 230 MPa |
| elongation | Break | ASTM D638 | 1.9 % |
| Flexural modulus | ASTM D790 | 19000 MPa | |
| bending strength | ASTM D790 | 347 MPa | |
| compressive strength | ASTM D695 | 262 MPa | |
| shear strength | ASTM D732 | 120 MPa | |
| ASTM D732 | 95.8 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | >316 °C | |
| Linear coefficient of thermal expansion | ASTM D696 | 9E-06 cm/cm/°C | |
| ASTM D696 | 1.8E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top