ABS LUBEMIX 85 BLACK
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ISO1183/A | 1.13到1.17 g/cm³ | |
| melt mass-flow rate | ISO1133 | 15到20 g/10min |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTMD256 | 45到50 kJ/m² | |
| ISO180/A | 40到45 kJ/m² | ||
| ISO180 | 无断裂 | ||
| Charpy Notched Impact Strength | ISO179/1eA | 40到45 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO179/1eU | 无断裂 | |
| Impact strength of cantilever beam gap | ASTMD256A | 450到500 J/m | |
| ASTMD256 | 无断裂 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO527-2/1A/1 | 2000到2500 MPa | |
| Tensile stress | Yield | ISO527-2/1A/50 | 50.0到55.0 MPa |
| Break | ISO527-2/1A/50 | 45.0到50.0 MPa | |
| Tensile strain | Yield | ISO527-2/1A/50 | 6.0到8.0 % |
| Break | ISO527-2/1A/50 | 45到50 % | |
| Flexural modulus | ISO178 | 1800到2300 MPa | |
| Bending stress | ISO178 | 55.0到60.0 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTMD648 | 115到125 °C | ||
| ISO75-2/B | 120到130 °C | ||
| ASTMD648 | 100到110 °C | ||
| vicat | ISO306/A120 | 125到135 °C | |
| ISO306/B120 | 120到130 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top