POM AW-01 CF2001 JAPAN POLYPLASTIC

Form：Granules | Grade：Special level

Properties:

High slidingstandard

Typical Applications:

Household appliancesHousehold appliancesElectrical fieldElectronic fieldAutomotive sector

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Household appliances \| Household appliances \| Electrical field \| Electronic field \| Automotive sector
Properties:	High sliding \| standard

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	2350	Mpa
tensile strength		ISO 527-2	54.0	Mpa
Nominal tensile fracture strain		ISO 527-2	25	%
Bending modulus		ISO 178	2200	Mpa
bending strength		ISO 178	75.0	Mpa
Friction coefficient	Dynamic2	JISK7218	0.30
Friction coefficient	Friction coefficient	Steel - Dynamic3	JISK7218	0.16
Wear factor	0.98MPa,0.30m/sec4	JISK7218	<1.0	10^-8mm³/N·m
	Wear factor	0.98MPa,0.30m/sec5	JISK7218	20	10^-8mm³/N·m
		Wear factor	0.060MPa,0.15m/sec6	JISK7218	700	10^-8mm³/N·m
		Wear factor	Wear factor	0.060MPa,0.15m/sec7	JISK7218	1400	10^-8mm³/N·m
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	80.0	°C
Linear coefficient of thermal expansion	MD：23to55°C	Internal Method	1.3E-04	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD：23to55°C	Internal Method	1.3E-04	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	190°C/2.16kg	ISO 1133	9.0	g/10min
Melt Volume Flow Rate (MVR)	190°C/2.16kg	ISO 1133	8.00	cm3/10min
Shrinkage rate	TD:2.00mm	ISO 294-4	1.8	%
Shrinkage rate	Shrinkage rate	MD:2.00mm	ISO 294-4	2.1	%
Water absorption rate	23°C,24hr	ISO 62	0.70	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	3E+14	ohms·cm
Dielectric strength	3.00mm	IEC 60243-1	20	KV/mm
Surface resistivity		IEC 60093	3E+14	ohms
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	M-Scale	ISO 2039-2	70
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
ColourNumber			CF2001/CD3501

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top