PA12 VESTAMID® L1901 EVONIK GERMANY
74
- Properties:No additivesDimensional stability
- Usages:Cable sheathWire sheath
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | IS062 | 0.50 % | |
| density | IS01183 | 1.75 g/cm³ |
| other | Test Condition | Test Method | Test Result |
|---|---|---|---|
| proof tracking index | IEC 60112 | 400 V | |
| Surface Resistivity | IEC 60093 | 1.00E+12 Ω | |
| Linear forming shrinkage rate | IS02577 | 0.6 % |
| Flame retardant performance UL94 | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Flame retardant performance UL94 | UL94 | ℃ | |
| UL94 | V0 ℃ | ||
| UL94 | ℃ | ||
| UL94 | ℃ |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile strength at break | IS0527 | 190 Mpa | |
| elongation at break | IS0527 | 1.6 % | |
| Yield bending strength | IS0178 | 280 Mpa | |
| Flexural modulus | IS0178 | 15000 Mpa | |
| Impact strength of simply supported beam without notch | IS0179 | 50 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Hot deformation temperature 1.8MPa | IS076 | 270 ℃ | |
| Hot deformation temperature 0.45MPa | IS076 | ℃ | |
| GWFI | IEC 60695-2-11 | ℃ | |
| IEC60695-2-12 | 960 ℃ | ||
| IEC 60695-2-12 | ℃ | ||
| IEC 60695-2-12 | ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top