PA46 F12 DSM HOLAND

Form：Granules | Grade：Enhanced level

Properties:

Glass fiber reinforcedThermal stability

Typical Applications:

Home appliance componentsElectronic and electrical components

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Home appliance components \| Electronic and electrical components
Properties:	Glass fiber reinforced \| Thermal stability

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	65	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
Flammability level		UL 94	V-0
Flammability level	Flammability level		UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	13500	Mpa
tensile strength	Break	ISO 527-2	170	Mpa
Tensile strain	Break	ISO 527-2	1.9	%
Bending modulus		ISO 178	14500	Mpa
bending strength		ISO 178	280	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	305	°C
Melting temperature		ISO 11357-3	325	°C
Linear coefficient of thermal expansion	Flow	ASTM D696	3.0E-5	cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Across Flow	ASTM D696	3.5E-5	cm/cm/°C
RTI Elec	0.35 mm	UL 746	140	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	横向Flow	ISO 294-4	0.85	%
Shrinkage rate	Shrinkage rate	Flow	ISO 294-4	0.30	%
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	1.5	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	> 1.0E+15	ohms·cm
Dielectric strength		IEC 60243-1	33	KV/mm
Relative permittivity	100 Hz	IEC 60250	4.20
Relative permittivity	Relative permittivity	1 MHz	IEC 60250	3.90
Compared to the anti leakage trace index		IEC 60112	PLC 0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top