Epoxy 44N Arlon-MED

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		Internal Method	19300	MPa
Poisson's ratio		ASTM D3039	0.15
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Glass transition temperature		Internal Method	175	°C
Linear coefficient of thermal expansion	MD：--6	Internal Method	1.4E-5到1.6E-5	cm/cm/°C
	Linear coefficient of thermal expansion	MD：<175°C7	Internal Method	5.5E-05	cm/cm/°C
	Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	MD：>175°C7	Internal Method	2E-04	cm/cm/°C
thermal conductivity	100°C	ASTME1461	0.30	W/m/K
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792A	1.85	g/cm³
Water absorption rate	24hr	Internal Method	0.10	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Arc resistance		Internal Method	65.0	sec
Surface resistivity	--8	Internal Method	4E+10	ohms
Surface resistivity	Surface resistivity	--9	Internal Method	2.9E+13	ohms
Volume resistivity	--8	Internal Method	3.3E+13	ohms·cm
Volume resistivity	Volume resistivity	--9	Internal Method	2.6E+13	ohms·cm
Dielectric strength		Internal Method	59	kV/mm
Dielectric constant	1MHz	Internal Method	4.40
Dissipation factor	1MHz	Internal Method	0.025
film	Test Condition	Test Method	Test Result	Test Unit
Peel strength	--3	Internal Method	1.4	kN/m
	Peel strength	--4	Internal Method	1.4	kN/m
	Peel strength	Peel strength	--5	Internal Method	1.4	kN/m
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
expansion rate	50to260°C	Internal Method	2.4	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top