
PI, TS 680-3 ELANTAS PDG Inc.
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of cantilever beam gap | 23℃ | J/m | 0.006to0.026 | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Bending modulus | 23℃ | 2551.72to3220.69 | Mpa | |
| bending strength | 23℃ | 58.62to253.79 | Mpa | |
| elongation | Break,23℃ | % | 4.0to8.0 | |
| compressive strength | 23℃ | 20.69to237.24 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| RTI | °C | 130to210 | ||
| Linear coefficient of thermal expansion | MD | mm/mm/°C | 38.1E-5到50.8E-5 | |
| RTI Elec | °C | 130to240 | ||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | 23℃,24hr | % | 0.080to2.9 | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dissipation factor | 23℃ | 8.0E-4到2.1E-3 | ||
| Volume resistivity | 23℃ | ohms·cm | 4.0E+12到5.8E+15 | |
| Dielectric constant | 23℃ | 2.95to3.45 | ||
| Dielectric strength | 23℃ | V/mil | 390to7800 | |
| film | Test Condition | Test Method | Test Result | Test Unit |
| Secant modulus | MD | 2793.1to3172.41 | Mpa | |
| film thickness | mil | 0.95to3.1 | ||
| elongation | Break | % | 72to95 | |
| Elmendorf tear strength | MD | g | 6.8to38 | |
| tensile strength | Break | 191.72to241.38 | Mpa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.