TPE G7650-1 SUZHOU GLS

Form：Granules | Grade：Injection grade

Properties:

High mobilityThermal stability

Typical Applications:

packingsporting goodsToyWasherPolyonePolyOne USA

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	packing \| sporting goods \| Toy \| Washer \| Polyone \| PolyOne \| USA
Properties:	High mobility \| Thermal stability

Certificates

No Data...

Technical Data Sheet

Filling analysis	Test Condition	Test Method	Test Result	Test Unit
Apparent viscosity	200°C,1340sec^-1	ASTM D3835	48.3	Pa·s
Apparent viscosity	Apparent viscosity	200°C,11200sec^-1	ASTM D3835	9.44	Pa·s
elastomer	Test Condition	Test Method	Test Result	Test Unit
tensile strength	300%Strain,23°C	ASTM D412	2.90	Mpa
tensile strength	tensile strength	Break,23°C	ASTM D412	4.27	Mpa
elongation	Break,23°C	ASTM D412	560	%
tear strength		ASTM D624	20.5	kN/m
Permanent compression deformation	23°C,22hr	ASTM D395B	12	%
tensile strength	100%Strain,23°C	ASTM D412	1.52	Mpa
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	200°C/5.0kg	ASTM D1238	9.0	g/10min
Shrinkage rate	MD	ASTM D955	1.1-1.9	%
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreA,10Sec	ASTM D2240	50

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top