Epoxy FR-1820 ELANTAS PDG Inc.

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

Cured Properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate			0.010	%
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	4.8mm	UL 94	V-0
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength			33.6	MPa
elongation	Break		3.0	%
thermosetting	Test Condition	Test Method	Test Result	Test Unit
Thermosetting components	按重量计算的混合比		100
	Thermosetting components	Hardener		按重量计算的混合比:25
	Thermosetting components	Thermosetting components	热固性混合粘度(25°C)		6900	cP
thermal performance	Test Condition	Test Method	Test Result	Test Unit
thermal conductivity			0.50	W/m/K
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density	--2		0.984	g/cm³
	density	--3		1.65	g/cm³
	density	density	吸水率(24hr)		0.26	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity	25°C		4.6E+14	ohms·cm
Dielectric strength			19	kV/mm
Dielectric constant	25°C,1kHz		4.18
Dissipation factor	25°C,1kHz		0.024
Surface resistivity			2.2E+15	ohms
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD		80to85

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top