PPA ProPolymers PPA TI-50G
0
- Properties:Fillerglass fiber reinforced material50%filler by weight
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | % | 0.10 0.10 | |
| % | 0.50 0.50 | ||
| Water absorption rate | % | 0.25 0.25 | |
| density | g/cm³ | 1.64 1.64 |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Rockwell hardness | R-Scale | 125 125 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Suspended wall beam without notch impact strength | J/m | 1000 1000 | |
| Impact strength of cantilever beam gap | J/m | 80 80 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | MPa | 221 207 |
| elongation | Break | % | 2.0 2.0 |
| Flexural modulus | MPa | 16500 16500 | |
| bending strength | MPa | 321 300 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| °C | 285 285 | ||
| °C | 277 277 | ||
| Continuous use temperature | °C | 166 166 | |
| °C | 302 302 | ||
| cm/cm/°C | 1.4E-05 1.4E-05 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top