Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.35 g/cm³ |
| density | | ASTM D792 | 1.36 g/cm³ |
| Water absorption rate | | ASTM D570 | 2.0 % |
| Water absorption rate | | ASTM D570 | 1.2 % |
| Water absorption rate | | ASTM D570 | 0.74 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | HB |
| UL flame retardant rating | | UL 94 | HB |
| UL flame retardant rating | | UL 94 | V-0 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| Viscosity | | ASTM D229 | 880000 g |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| compressive strength | | ASTM D695 | 64.1 MPa |
| compressive strength | | ASTM D695 | 63.4 MPa |
| compressive strength | | ASTM D695 | 173 MPa |
| compressive strength | | ASTM D695 | 170 MPa |
| compressive strength | | ASTM D695 | >310 MPa |
| tensile strength | | ASTM D638 | 88.9 MPa |
| compressive strength | | ASTM D695 | 84.8 MPa |
| compressive strength | | ASTM D695 | >310 MPa |
| bending strength | | ASTM D790 | 110 MPa |
| bending strength | | ASTM D790 | 122 MPa |
| bending strength | | ASTM D790 | 105 MPa |
| tensile strength | | ASTM D638 | 55.8 MPa |
| tensile strength | | ASTM D638 | 93.8 MPa |
| tensile strength | | ASTM D638 | 68.9 MPa |
| bending strength | | ASTM D790 | 147 MPa |
| bending strength | | ASTM D790 | 121 MPa |
| bending strength | | ASTM D790 | 99.3 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 47 J/m |
| Impact strength of cantilever beam gap | | ASTM D256 | 46 J/m |
| Impact strength of cantilever beam gap | | ASTM D256 | 48 J/m |
| Impact strength of cantilever beam gap | | ASTM D256 | 65 J/m |
| Impact strength of cantilever beam gap | | ASTM D256 | 61 J/m |
| Impact strength of cantilever beam gap | | ASTM D256 | 54 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Dissipation Factor | | ASTM D150 | 0.22 |
| Dissipation Factor | | ASTM D150 | 0.79 |
| Dissipation Factor | | ASTM D150 | 0.043 |
| Dissipation Factor | | ASTM D150 | 0.27 |
| Dissipation Factor | | ASTM D150 | 0.093 |
| Dissipation Factor | | ASTM D150 | 0.046 |
| arc resistance | | ASTM D495 | 143 sec |
| arc resistance | | ASTM D495 | 148 sec |
| arc resistance | | ASTM D495 | 63.0 sec |
| dielectric strength | | ASTM D149 | 83000 V |
| dielectric strength | | ASTM D149 | 73000 V |
| dielectric strength | | ASTM D149 | 57000 V |
| Surface Resistivity | | ASTM D257 | 2.2E+11 ohms |
| Surface Resistivity | | ASTM D257 | 1.6E+12 ohms |
| Volume resistivity | | ASTM D257 | 4.4E+10 ohms·cm |
| Volume resistivity | | ASTM D257 | 1.1E+10 ohms·cm |
| dielectric strength | | ASTM D149 | 17 kV/mm |
| dielectric strength | | ASTM D149 | 14 kV/mm |
| dielectric constant | | ASTM D150 | 7.84 |
| dielectric constant | | ASTM D150 | 6.81 |
| dielectric constant | | ASTM D150 | 5.68 |
| dielectric constant | | ASTM D150 | 9.49 |
| dielectric constant | | ASTM D150 | 7.56 |
| dielectric constant | | ASTM D150 | 6.15 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Linear coefficient of thermal expansion | | | 2.6E-05 cm/cm/°C |
| Linear coefficient of thermal expansion | | | 2.2E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare