
PC DMX2415 SABIC INNOVATIVE JAPAN
108
Form:Granules | Grade:Injection grade
Properties:
wear resistanttransparentHigh rigidityhigh strengthFlame retardant
Typical Applications:
Electrical fieldElectronic fieldAutomotive sector
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electrical field | Electronic field | Automotive sector |
| Properties: | wear resistant | transparent | High rigidity | high strength | Flame retardant |
Certificates
No Data...
Technical Data Sheet
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Elongation at Break | ASTM D638/ISO 527 | 70 | % | |
| elongation | ASTM D638/ISO 527 | 7.0 | % | |
| tensile strength | ASTM D638/ISO 527 | 80.0 | kg/cm²(MPa)[Lb/in²] | |
| Tensile modulus | ASTM D638/ISO 527 | 2900 | kg/cm²(MPa)[Lb/in²] | |
| bending strength | ASTM D790/ISO 178 | 120 | kg/cm²(MPa)[Lb/in²] | |
| Bending modulus | ASTM D790/ISO 178 | 2600 | kg/cm²(MPa)[Lb/in²] | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | ASTM D696/ISO 11359 | 0.000070 | mm/mm.℃ | |
| Vicat softening temperature | ASTM D1525/ISO R306 | 140 | ℃(℉) | |
| Hot deformation temperature | HDT | ASTM D648/ISO 75 | 133 | ℃(℉) |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | ASTM D570/ISO 62 | 0.080 | % | |
| Shrinkage rate | ASTM D955 | 0.50-0.80 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.