
ABS HFA707 KUMHO KOREA
87
Form:Granules | Grade:Flame retardant grade
Properties:
Flame retardantChemical resistanceHigh impact resistanceHigh glossWeather resistance
Typical Applications:
Computer accessoriesTerminal blockTVHousehold appliancesOffice supplies
Product Description
Certificates(1)
Datasheet
Product Description
| Typical Applications: | Computer accessories | Terminal block | TV | Household appliances | Office supplies |
| Properties: | Flame retardant | Chemical resistance | High impact resistance | High gloss | Weather resistance |
Certificates

Technical Data Sheet
| other | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| purpose | 电脑显示器、复印机、办公设备 | |||
| characteristic | 良流动性 | |||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Impact strength of cantilever beam gap | ASTM D256/ISO 179 | 22 | kg·cm/cm(J/M)ft·lb/in | |
| ASTM D256/ISO 179 | 24 | kg·cm/cm(J/M)ft·lb/in | ||
| bending strength | ASTM D790/ISO 178 | 600 | kg/cm²(MPa)[Lb/in²] | |
| Bending modulus | ASTM D790/ISO 178 | 21000 | kg/cm²(MPa)[Lb/in²] | |
| Rockwell hardness | ASTM D785 | 100 | ||
| tensile strength | ASTM D638/ISO 527 | 450 | kg/cm²(MPa)[Lb/in²] | |
| Elongation at Break | ASTM D638/ISO 527 | 40 | % | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Vicat softening temperature | ASTM D1525/ISO R306 | 91 | ℃(℉) | |
| Hot deformation temperature | HDT | ASTM D648/ISO 75 | 76 | ℃(℉) |
| Combustibility (rate) | UL 94 | 0.3 | ||
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| melt mass-flow rate | ASTM D1238/ISO 1133 | 60 | g/10min | |
| ASTM D1238/ISO 1133 | 6 | g/10min | ||
| Shrinkage rate | ASTM D955 | 0.4-0.7 | % | |
| density | ASTM D792/ISO 1183 | 1.18 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.