Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Water absorption rate | | ISO62 | 0.30 % |
| Water absorption rate | | ISO62 | 0.10 % |
| density | | ISO1183 | 1.30 g/cm³ |
| Shrinkage rate | | ISO2577 | 0.40到0.60 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | ISO1210 | V-0 |
| Burning wire flammability index | | IEC60695-2-12 | 750 °C |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile stress | Yield | ISO527-2 | <60.0 MPa |
| Tensile strain | Break | ISO527-2 | 5.0到10 % |
| Flexural modulus | | ISO178 | 3200 MPa |
| Bending stress | | ISO178 | 100 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ISO180/1A | 6.0 kJ/m² |
| | ISO180/1U | 50 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | ASTMD257 | 1.0E+2到1.0E+5 ohms |
| EMIShieldingEffectivity | | ASTMD4935 | 40.0到55.0 dB |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| RTI Imp | | UL746 | 85.0 °C |
| | ISO75-2/A | 90.0 °C |
| | ISO11359-2 | 6E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare