Unspecified Mytex® AN16L(W)-D56 MYTEX USA
0
- Properties:Fillertalc filler
- Usages:Automotive exterior decorationautomotive exterior parts
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 0.930 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 17 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | ASTM D638 | 105 MPa | |
| ASTM D638 | 19 MPa | ||
| bending strength | ASTM D790 | 23 MPa | |
| Flexural modulus | ASTM D790 | 1150 MPa | |
| Impact strength of cantilever beam gap | ASTM D256 | 450 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | ASTM D648 | 85 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top