ABS 3453
19
- Properties:High impact resistanceHigh mobilityHigh gloss
- Usages:Home appliance componentsFitness equipmentCastersAutomotive sector
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 3.8 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile yield strength | ASTM D-638 | 43 Mpa | |
| IZOD notch impact strength 73 ° F (23 ℃) | ASTM D-256 | 35 kJ/m² | |
| Tensile yield elongation | ASTM D-638 | 3 % | |
| tensile elongation at break | ASTM D-638 | 14 % | |
| tensile breaking strength | ASTM D-638 | 31 Mpa | |
| Tensile modulus | ASTM D638/ISO 527 | 31 kg/cm²(MPa)[Lb/in²] | |
| tensile strength | ASTM D638/ISO 527 | 43 kg/cm²(MPa)[Lb/in²] | |
| elongation | ASTM D638/ISO 527 | 3 % | |
| Izod notch impact strength | ASTM D256/ISO 179 | 35 kg·cm/cm(J/M)ft·lb/in | |
| Tensile elongation at break (elongation at break) | ASTM D638/ISO 527 | 14 % |
| Physical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D1238/ISO 1133 | 5 g/10min | |
| ASTM D1238/ISO 1133 | 10 g/10min |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Vicat softening point (120 ℃/10hr) | ASTM D-1525 | 103 °C | |
| vicat | ASTM D1525/ISO R306 | 103 ℃（℉） |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top