Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 1.75到1.90 g/cm³ |
| Shrinkage rate | | ASTMD955 | 0.050到0.20 % |
| Water absorption rate | | ASTMD570 | 0.20到0.30 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Barcol Hardness | | ASTMD2583 | 50到60 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| burning rate | | ASTMD635 | 17 mm/min |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTMD256 | 640 J/m |
| Suspended wall beam without notch impact strength | | ASTMD4812 | 750 J/m |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 15200 MPa |
| tensile strength | | ASTMD638 | 62.1 MPa |
| Flexural modulus | | ASTMD790 | 13800 MPa |
| bending strength | | ASTMD790 | 159 MPa |
| compressive strength | | ASTMD695 | 186 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | >204 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare