PP PPH-ED-012
0
- Usages:Injection molding or extrusion of flat wire
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| isotactic index | ≥96.0 % | ||
| VOLATILE MATTER | ≤0.20 % | ||
| Powder ash content | ≤250 Mg/kg | ||
| ≤100 Mg/kg | |||
| Apparent density | ≥0.41 g/cm | ||
| melt mass-flow rate | 0.50-2.2 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile yield strength | ≥31.5 MPa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top