Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTM D1238 | 10 g/10min |
| Shrinkage rate | | ASTM D955 | 0.30-0.50 % |
| Water absorption rate | | ASTM D570 | 0.13 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTM D785 | 121 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTM D638 | 78.5 Mpa |
| elongation | | ASTM D638 | 4.0 % |
| Flexural modulus | | ASTM D790 | 3330 Mpa |
| bending strength | | ASTM D790 | 108 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTM D257 | 4E+16 ohms·cm |
| dielectric strength | | ASTM D149 | 31 KV/mm |
| dielectric constant | | ASTM D150 | 2.97 |
| Dissipation Factor | | ASTM D150 | 9.6E-03 |
| arc resistance | | ASTM D495 | 120 sec |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 155 °C |
| Heat distortion temperature | | ASTM D648 | 144 °C |
| Linear coefficient of thermal expansion | | ASTM D696 | 4.3E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices